Control access across buildings with ISE NET, as a configurable access control system and/or switching device for intrusion detection technology.

Always maintain full control over the group of people authorized to access your buildings with our ISE NET/RDM control system.

As a configurable access control system and/or switching device for intrusion detection technology, it has an Ethernet interface for cross-building and cross-site networking via TCP/IP—as well as a reader line extension for connecting a maximum of four sesamsec or comlock reader units.

The right product for you?

Your advantages at a glance

Top quality: made in Germany

Flexible software options

Optimal integration capability into existing systems

Product features

Product features

Up to 4 readers per ISE NET/RDM can be connected

3,000 keys/codes programmable

255 time models, any number of time zones

Real-time clock with power reserve of about 7-8 days

Connection of up to 62 ISE+ controllers

Dimension board: 227 x 145 x 29 mm

Ethernet 10/100 Mbit for connection to the PC network (RJ45 socket)

VdS class C approval as switching device for burglar alarm systems

Master/slave mode for combining two controllers to double the inputs and outputs

Product family

ISE-NET controls The extra layer of security: thanks to ISE-NET controllers, you can enable access monitoring across locations.

Our ISE-NET controllers are bundled power. They have an IP interface for configuration and data synchronization and can operate as RS485 masters in a network of up to 62 ISE+ controllers.

ISE-NET devices are suitable for applications where the end customer administers the configuration of the system independently. With our management program SesProfessional, several ISE-NET devices and RS485 networks can be administered per customer. Thus, e.g., the administration of multi-site systems is possible without any problems.

Pictures & Videos

Pictures & Videos

01 01
Downloads Reader connection options

Reader connection options

Connectable readers: sesamsec/comlock

For stand-alone programming: RJ-45 network connector

For control networking: RS485

Part numbers

Part numbers

Please note: The drivers for sesamsec reading units are loaded at the factory! If you need drivers for other interfaces, please specify this separately in your order.

Our sales team will be happy to advise you on all available drivers.

ISE NET/RDM in housing
ISE NET/RDM module without housing
ISE NET/RDM module for installation in VdS ZK power supply unit
RDM board

Important note

The product images and features described on this website may refer to specific product variants or additional components and shall not be considered as a binding description. Please contact us for more information regarding the product variants available in the different markets.

Get in touch with us