HFS Classic Plus
The reader with robust aluminum housing.
The HFS Classic Plus reader with the frequency 125 kHz is the ideal choice for system requirements with a low frequency. It also offers you maximum flexibility by combining several transponder types: the EM4200, EM4050, Hitag 1, Hitag 2 and the Hitag S. You also need a reader that won’t react with exposure to elements such as water, wood, textiles or aluminum? One that is robustly built? Then the HFS Classic Plus is your reader—simply ideal for all outdoor and industrial areas.
Build on the high standard made in Germany: with the HFS Classic Plus. This contactless reader unit can be connected to the sesamsec ISE controllers or to devices with comlock interface. Additional flexibility is provided by the two feedback options for access authorization: visually via integrated duo LED (green/red), or acoustically via a piezo sound generator. A further plus: all colors and the piezo can be controlled freely and conveniently by the customer. And the sturdy housings made of anodized or powder-coated aluminum defy wind and weather. With certainty.
The right product for you?
Your advantages at a glance
HFS Classic Plus A reader of our proven HFS Classic product family—with added technical features.
Flexibility: this is what the readers of the HFS Classic Plus product family stand for. In addition to the 125 kHz reader unit for EM4102/4200 transponders, the 125 kHz Plus reader unit gives you the option of using additional transponders such as EM4200, EM4050, Hitag 1, Hitag 2 and Hitag S.
Need a solid solution for a low-frequency application? Then this 125 kHz reader may be just the right option for you. By the way, the HFS Classic Plus is a real all-arounder, thanks in part to its robust aluminum housing, which makes it the ideal solution for outdoor or industrial use.
Pictures & Videos
Connection options for the HFS Classic Plus with robust aluminum housing.
We want your reader to fit perfectly into your existing system landscape. Do you have any questions on this topic? Our sales team is always ready to provide you with competent support.
The firmware installed during production determines which interface and which required protocol the individual reader uses and thus which system it can be operated on. Therefore, please pay attention to the correct article number when ordering. It is also possible to update the firmware of the reader and thus, among other things, the interface used in the field. This is possible via the RS485 interface of the reader with an associated PC tool after the reader has been set to configuration mode using the RSC security card.
An explanation about the composition of the part numbers can be found on this page in the "Downloads" section.