HFS Plus
The reader in the Siedle Vario 611 version.
For your added flexibility: the HFS reader. With it, you have the choice of several transponder types: the EM4200, EM4050, Hitag 1, Hitag 2 and Hitag S. It is the ideal option for low-frequency system requirements. You also need a reader won’t react with exposure to elements such as water, wood, textiles or aluminum? Then the HFS Plus is your reader. Its advantage: it can be easily integrated into Siedle Vario 611 systems. So you benefit twice over from top quality, made in Germany.
Build on the high standard made in Germany: with the HFS Plus. This contactless reader unit can be connected to the sesamsec ISE controllers or to devices with comlock interface. Additional flexibility is provided by the two feedback options for access authorization: visually via integrated duo LED (green/red), or acoustically via a piezo sound generator. Another plus is that all colors and the piezo can be conveniently controlled by the customer.
The reader can also be perfectly integrated into the Siedle Vario 611 system. Choose between several housing variants, from classic and discreet to ultra-modern. What they have in common: they all defy wind and weather. And that with certainty. Would you like a customized solution? We will be happy to advise you in detail on other system variants from Siedle.
The right product for you?
Your advantages at a glance
HFS Plus A reader in our successful HFS Plus product range.
Flexibility: this is what the readers of the HFS Plus product family stand for. In addition to the 125 kHz reader unit for EM4102/4200 transponders, the 125 kHz Plus reader unit gives you the option of using other transponders such as EM4050, Hitag 1, Hitag 2 and Hitag S.
You need a solid solution for a low-frequency application? Then this 125 kHz reader may be just the right choice for you.
Pictures & Videos
Connection options for the HFS Plus, in the Siedle Vario 611 version
Part numbers
We want your reader to fit perfectly into your existing system landscape. Do you have any questions on this topic? Our sales team is always ready to provide you with competent support.
The firmware installed during production determines which interface and which required protocol the individual reader uses and thus which system it can be operated on. Therefore, please pay attention to the correct article number when ordering. It is also possible to update the firmware of the reader and thus, among other things, the interface used in the field. This is possible via the RS485 interface of the reader with an associated PC tool after the reader has been set to configuration mode using the RSC security card.
An explanation about the composition of the part numbers can be found on this page in the "Downloads" section.