HMD Mifare Securyt MO

Reading unit with keypad—for mounting in on-site front panels.

Quality runs in the family with the 13.56 MHz Mifare reader unit. With a user-friendly, capacitive keypad, this unit connects to all sesamsec controls and various intrusion detection and access control systems.

The HMD Mifare Securyt, with AES 128-bit encryption and Mifare DESFire EV2 transponders, is VdS-approved. It also offers you the option of being able to make a firmware update in the field at any time. This keeps you flexible and saves you money. Because our products grow with your needs—and thus fit into any of your authentication setups in the future.

Also included in the package: a security card that protects against unauthorized access.

Wind, weather, dirt, cleaning agents or disinfectants—all no problem for the high-quality surface of the reader. Because it consists of a robust toughened safety glass (ESG), with user-friendly, capacitive keypad and integrated RFID reader. The illumination of the keypad is controlled by input and twilight sensors—either during immediate operation only or in continuous operation. The connection runs via a plug strip or via a VdS-compliant, completely encapsulated, 4-meter long connection cable.

This reader can be easily integrated into on-site front panels, thus optimally adapting to its environment. A dimensional drawing for installation can be found here under Downloads.

The right product for you?

Your advantages at a glance

Top quality: made in Germany

High quality of materials and workmanship

Flexible software solutions

Product features

Product features

High-quality toughened safety glass (ESG) surface with capacitive keypad and integrated RFID reader

Preconfigured interfaces: sesamsec/comlock, RS485 and Clock-Data/Wiegand

Firmware update in the field is possible at any time

Reading method with 13.56 MHz

Encryption: AES 128 bit with Mifare DESFire transponders

Signaling works optically with duo LED (red/green), as well as acoustically

Connection via connector strip or VdS-compliant, completely molded 4-meter cable

For installation in on-site front panels

Product family

13.56 MHz Mifare reader units About the 13.56 MHz Mifare family

The 13.56 MHz Mifare readers are part of the HMD generation, 100% made in Germany! They read all Mifare as well as ISO 14443-A transponders: Mifare Classic, Mifare Mini, Mifare Ultralight, Mifare Desfire and Legic Advant. What they have in common is that they work with optional 128-bit AES encryption in conjunction with Mifare DESFire EV2 transponders. This means that they meet the highest security requirements. In addition, the majority of these readers—depending on the design—are VdS Class C approved.

The 128-bit AES encryption of the reader can be activated using the enclosed security card, the  "ReaderSecurityCard." Please note that only Mifare DESFire transponders encoded by sesamsec can be read in the encrypting VdS operating mode.

Do you have questions about possible encryption methods? Our support team will be happy to help you with words and deeds. Promptly and at any time!

Encrypting VdS operating mode in conjunction with Telenot

Important for you to know: If a Mifare HMD reader is operated on a Telenot complex or hiplex control panel, the reader automatically detects this after being switched on. In this case, the encryption of the reader is not switched on or off via the security card, but the system key is administered via the Telenot system and sent to the reader via the comlock interface. Thus, only Mifare DESFire transponders that have been encoded to the respective system via the Telenot system are read in the encrypting operating mode.

Please keep this in mind when selecting your product.

Pictures & Videos

Pictures & Videos

01 03
Downloads Connection options

Connection options for HMD Mifare Securyt with keypad—for mounting in on-site front panels.

With our HMD Mifare reader units, you always remain flexible. This is ensured by several standard interfaces that are pre-installed. This means they always integrate perfectly into your existing intrusion detection and access control systems. For more detailed information on connection options, please contact our competent sales team.

sesamsec and comlock


Clock Data/Wiegand

Part numbers

Part numbers

We want your reader to fit perfectly into your existing system landscape. Do you have any questions on this topic? Our sales team is always ready to provide you with competent support.

The firmware installed during production determines which interface and which required protocol the individual reader uses and thus which system it can be operated on. Therefore, please pay attention to the correct article number when ordering. It is also possible to update the firmware of the reader and thus, among other things, the interface used in the field. This is possible via the RS485 interface of the reader with an associated PC tool after the reader has been set to configuration mode using the RSC security card.
An explanation about the composition of the part numbers can be found on this page in the "Downloads" section.

HMD Mifare Securyt for installation in on-site front panels with plug connection
HMD Mifare Securyt VdS version, for installation in on-site front panels with 4m cable

Important note

The product images and features described on this website may refer to specific product variants or additional components and shall not be considered as a binding description. Please contact us for more information regarding the product variants available in the different markets.

Get in touch with us